Looking for a better deal on your insurance? Get a quote
Become a registered trader - Join us



Roofing

Expert advice on roof repairs, maintenance, replacements, storm damage and everything homeowners need to know about keeping their roof safe, secure and weatherproof.

Roofing

How to block an unused chimney properly

If you've got a fireplace that you no longer use, you might be wondering whether you can simply block the chimney to stop cold draughts coming into your home.

If you've got a fireplace that you no longer use, you might be wondering whether you can simply block the chimney to stop cold draughts coming into your home. The short answer is “yes”, but it's important to do it properly. Blocking an unused chimney can help reduce heat loss and prevent unwanted visitors from making themselves at home, but sealing it completely could leave you with a damp problem that's much harder to fix.

Fortunately, there are several ways to block an unused chimney, from simple draught excluders that you can fit yourself to more permanent solutions installed by a professional. The best option will depend on the condition of your chimney and whether you think you might want to use the fireplace again in the future.

Why you shouldn't completely seal an unused chimney

Before you start blocking up your fireplace, there's one important thing to understand: an unused chimney still needs ventilation. Chimneys are designed to allow air to move through them, and even when they're no longer being used for fires, that airflow helps prevent moisture from building up inside the flue. If you seal the chimney at both ends without providing ventilation, condensation can develop, eventually leading to damp patches on your chimney breast, damaged plaster, and unpleasant smells.

The trick is to reduce the draughts coming into your room while maintaining enough ventilation to keep the chimney dry. Depending on how your chimney is constructed, this might mean fitting a ventilated cap at the top and allowing a small amount of airflow at the bottom. It's also worth remembering that not every chimney is completely redundant. If you're unsure whether a flue is connected to a working gas fire, stove, or another appliance, get it checked before blocking anything.

Using a chimney balloon or draught excluder

If your fireplace is still open but you don't use it, a chimney balloon or draught excluder is often the simplest solution. These are designed to fit inside the chimney opening, reducing the amount of warm air escaping up the flue and stopping cold draughts entering the room.

Chimney balloons are inflatable devices that sit inside the flue, usually just above the fireplace opening; once inflated, they form a barrier against draughts and can be removed if you decide to use the fireplace again.

They're relatively inexpensive and, provided the chimney is suitable, you can usually fit one yourself. However, you need to follow the manufacturer's instructions carefully, particularly when it comes to getting the ventilation right.

Chimney draught excluders work in a similar way but are often made from materials such as wool. Some are designed to allow a small amount of air through, making them useful for reducing draughts without creating a completely airtight seal.

Whichever option you choose, make sure it's suitable for the size and shape of your chimney, and leave the removal handle or tag visible. Never light a fire while a chimney balloon or draught excluder is in place. If you use your fireplace occasionally, it's worth considering a purpose-designed damper instead, as forgetting to remove a draught blocker can be dangerous.

Fitting a chimney cap or cowl

While a chimney balloon helps stop draughts from entering the room, a chimney cap or cowl protects the chimney from above. A properly fitted cap can help prevent rainwater, birds, and debris from entering the flue, which is particularly useful if your fireplace hasn't been used for several years. However, there's an important difference between capping a chimney and sealing it completely. For an unused chimney, you'll generally want a ventilated cap that keeps the weather out while still allowing air to circulate so that you don’t get condensation.

Although chimney caps themselves are relatively straightforward, fitting one involves working at roof height, so this is definitely a job for a professional roofer or chimney specialist. They'll also be able to check the condition of the chimney pot, pointing, and surrounding brickwork while they're up there, so you can feel confident that your roof is ready for all weathers.

Permanently blocking an unused fireplace

If you're redecorating or renovating and know that you won't be using the fireplace again, you might prefer a more permanent solution by closing off the fireplace opening with brickwork, blockwork, or a suitable boarding system. If you choose this option, you’ll need ventilation such as a vent or another suitable means of airflow.

Before permanently closing a fireplace, it's a good idea to have the chimney swept and inspected so that you can identify any existing blockages, damaged brickwork, or signs of damp that may need to be dealt with before you make the problems harder to reach.

Can you block an unused chimney yourself?

Some chimney blocking techniques can be done fairly easily without professional help, such as fitting a removable draught excluder to a suitable, genuinely unused fireplace, provided you follow the manufacturer's instructions and understand the ventilation requirements. However, if the task involves the chimney stack, permanent building work, or changes to a flue connected to an appliance it’s best left to a professional.

It's also worth getting professional advice if you've recently moved into a property and don't know when the chimney was last used or inspected.

Common mistakes to avoid when blocking a chimney

Blocking an unused chimney isn't necessarily complicated, but getting it wrong can lead to problems that aren't immediately obvious. Some of the most common mistakes include:

  • Sealing the chimney completely: Blocking both ends without providing adequate ventilation can trap moisture and cause damp.
  • Ignoring existing problems: If there's already damp around the chimney breast, blocking the fireplace won't solve the underlying issue. The cause needs to be identified  and dealt with before you get on with the cosmetic work.
  • Using the wrong materials: Expanding foam, unsuitable insulation, or improvised airtight covers aren't appropriate substitutes for a properly designed chimney closure.
  • Forgetting about the chimney pot: Blocking the fireplace opening won't prevent rainwater entering from above if the chimney is damaged or unprotected.
  • Blocking a working flue: Never obstruct a chimney that's connected to an active fire, stove, or gas appliance.

If you're in any doubt, ask a chimney sweep or suitable tradesperson to assess the chimney before making changes. It's much easier to deal with a potential problem beforehand than to repair damp plaster or damaged brickwork afterwards.

What if you want to use the chimney again?

It's worth thinking about this before deciding how to block your chimney: if there’s a chance that you might want to reinstall an open fire or wood-burning stove in the future, a reversible solution could save you unnecessary work and expense. A chimney balloon or removable draught excluder is easier to take out than a permanently boarded or bricked-up fireplace. However, removing the blockage doesn't automatically mean the chimney is safe to use: if a chimney has been out of use for some time, it should be professionally swept and inspected before you light a fire. Depending on its condition and the appliance you want to install, it may also need repairs or a suitable flue liner.

Blocking an unused chimney properly is about finding the right balance between keeping your home warm and protecting the chimney from moisture. A simple draught excluder might be all you need, but if you're considering permanently closing the fireplace or fitting a chimney cap, it's worth getting some professional advice.

A qualified chimney sweep, roofer, or experienced builder can help you understand the condition of your chimney and recommend the best approach for your home.

Want to know more? Follow us on Facebook, Insta or Tiktok.

Looking for more roofing advice?

Find clear, practical answers to common roofing questions, helping homeowners understand everyday issues, know what checks they can carry out safely, and when it is best to contact a qualified professional.

  • How do I know if my roof needs repairing or replacing?

    A few broken tiles or a small patch of damaged flashing? That's usually a repair job. But if your roof is over 20 years old, leaks keep coming back in different spots, or you're seeing sagging or widespread cracking, replacement is probably the smarter long-term call. A proper inspection from a roofer will give you a straight answer before you commit to anything.

  • What are the signs of a leaking roof I shouldn't ignore?

    Water stains on ceilings, damp patches on walls, mould in the loft, or daylight peeking through the roof boards - all worth acting on quickly. A musty smell upstairs can also point to a slow leak, even when there's nothing visible. Roof leaks don't fix themselves, and the longer they're left, the more damage they do to insulation, timbers, and your ceilings.

  • Is moss on my roof a serious problem?

    Not an emergency, but don't leave it too long. Moss holds moisture against the tiles, which can work its way underneath and cause cracking in winter. It'll also block your gutters if it spreads far enough. Getting it professionally cleaned and treated is the way to go - it's not a job to DIY given the risks of working at height.

  • What happens if I delay getting my roof repaired?

    Small problems get expensive fast. A few displaced tiles can leave the felt underneath exposed to weather damage, and even a minor leak can cause timber rot, saturate insulation, and eventually ruin ceilings and walls. What could've been a straightforward repair becomes a much bigger project the longer you leave it, so it's best to get it sorted sooner rather than later.

  • How do I temporarily protect my home if my roof is damaged in a storm?

    If tiles are missing or water's getting in, the priority is limiting the damage until a roofer can get to you. A heavy-duty tarpaulin over the affected area is your best bet - make sure it extends well past the damage and is secured so it doesn't lift in the wind. Inside, move furniture out of the way, put buckets down, and use towels to manage any water coming through. Don't go up on the roof yourself as wet tiles are dangerously slippery.

  • What types of roofing materials are best for UK homes?

    Clay and concrete tiles, natural slate, and EPDM rubber for flat roofs are the most common on UK homes. Clay tiles are durable and handle our freeze-thaw winters well - though they're heavy, so not every roof can take them. Slate looks great and can last over a century done properly. For flat or low-pitched roofs, EPDM rubber has largely replaced traditional felt because it holds up much better against UV damage and standing water. The right call depends on your roof's pitch, your property's age, and what the structure can support.

  • How quickly can I get an emergency roof repair?

    Most roofers offer emergency callouts, but response times vary. In quieter periods, someone might get to you within a few hours. After a big storm when everyone's calling at once, you might be waiting a day or more. If there's a delay, get a tarpaulin over the damage in the meantime. One thing to watch: be wary of anyone who knocks on your door unsolicited after a storm offering to check your roof - it's a well-known scam.

  • What are green roofs and are they worth it?

    A green roof has a waterproof layer topped with soil and plants - usually sedums or grasses for a low-maintenance version, or something more garden-like if you want to go further. They insulate well, soak up rainwater, and are good for local wildlife. They can also extend the life of the waterproofing underneath by shielding it from sun and temperature swings. Whether it's worth it depends on your roof's structure and what you're hoping to get out of it. Installation needs to be done professionally - a leak underneath a green roof is a far bigger headache than on a standard flat roof.

Have a question about TrustATrader?

If you have a question in relation to TrustATrader specifically, please check out the TrustATrader FAQs, with separate lists tailored to consumers and tradespeople. Alternatively, get in touch with our team. We're happy to help!