Looking for a better deal on your insurance? Get a quote
Become a registered trader - Join us



Plumbing

Find guidance on leaks, pipework, drainage, water pressure and everyday home plumbing issues.

Plumbing

Leaking boiler overflow pipe: causes & what to do

Have you noticed water dripping from a pipe outside your house, somewhere near your boiler? It might not seem like much, especially if it's only a slow drip, but a leaking boiler overflow pipe can be a sign that something isn't quite right with your heating system.

Have you noticed water dripping from a pipe outside your house, somewhere near your boiler? It might not seem like much, especially if it's only a slow drip, but a leaking boiler overflow pipe can be a sign that something isn't quite right with your heating system.

The good news is that it doesn't necessarily mean your boiler is on its way out; it could be something relatively straightforward, such as excess pressure in the system or a faulty valve. However, it's important to work out where the water is coming from before deciding what to do next. Here's what you need to know about leaking boiler overflow pipes, what you can safely check yourself, and when it's time to call a heating engineer.

Why is my boiler overflow pipe leaking?

If your boiler overflow pipe is dripping, the most likely explanation is that water is escaping through the boiler's pressure relief valve. This safety feature releases water if the pressure inside your heating system becomes too high, helping to protect the boiler and its components. However, a leaking overflow pipe doesn't always mean the pressure is too high. The valve itself could be faulty or have become stuck slightly open, allowing water to escape even when the pressure has returned to normal.

Common causes include:

  • High boiler pressure: Too much water in the heating system can cause the pressure relief valve to open and release the excess.
  • A faulty pressure relief valve: Over time, the valve can become worn or fail to close properly, causing a persistent drip.
  • Expansion vessel problems: The expansion vessel helps manage changes in pressure as water heats up. If it's not working properly, pressure can rise too high when the heating comes on.
  • A problem with the filling loop: If the filling valve has been left open or is allowing water through when it should be closed, the system pressure can continue to rise.

It’s best not to bury your head in the sand and hope the problem will go away; even a small, persistent drip can eventually cause the boiler to lose pressure, potentially leaving you without heating or hot water.

Is it the overflow pipe or the condensate pipe?

Before you start worrying about a boiler leak, it's worth checking which pipe the water is coming from, this is because modern condensing boilers have more than one pipe running outside, and not every dripping pipe is a sign of a problem.

The pressure relief pipe, often referred to as the overflow pipe, is usually made from copper or another suitable metal and runs from the boiler to an outside wall. It's connected to a safety valve and shouldn't normally be discharging water.

The condensate pipe is generally made from plastic and carries wastewater produced during the boiler's normal operation. This is part of how modern condensing boilers work, so water flowing through the condensate pipe isn't necessarily anything to worry about.

Condensate pipes usually connect to a drain or suitable waste system; if water is escaping onto the ground rather than going into the drainage system, it's worth having the pipework checked, even if the boiler itself is working normally. If you're unsure which pipe you're looking at, don't disconnect anything to investigate. A Gas Safe registered heating engineer will be able to identify the pipe and establish whether there's a fault.

Check your boiler pressure

One of the easiest ways to get an idea of what's happening is to check your boiler's pressure gauge, which you'll usually find on the front of the boiler or on its digital display. Most domestic sealed heating systems operate at around 1 to 1.5 bars when cold, although the recommended pressure varies between boilers. It's normal for the pressure to rise slightly when the heating is running, but a significant increase could suggest there's a problem.

If the pressure is approaching 3 bars, the pressure relief valve on many domestic boilers will open to release water; this is a safety mechanism rather than a fault in itself, but you'll need to find out why the pressure is rising.

If your boiler pressure keeps dropping and you're having to top it up regularly, water could be escaping through the overflow pipe; it might only be a slow leak, but repeatedly topping up the system without fixing the cause won't solve the problem.

Check your boiler manual for the correct pressure range and make a note of what the gauge shows when the heating is cold and when it's running. This information can be useful if you decide that you need to speak to an engineer.

What to do if your boiler overflow pipe is dripping

If you've noticed a dripping pipe outside, there are a few simple checks you can make before calling someone out. You shouldn't try to dismantle the boiler or repair any internal components yourself, but you can often gather enough information to help an engineer identify the problem.

Check where the water is coming from. Have a look at the pipe from a safe position and see whether it's dripping continuously or only when the heating is on. Don't touch the outlet, as discharged water may be hot.

Look at the pressure gauge. Check whether the pressure is higher or lower than the range recommended in your boiler manual; if it's unusually high, allow the system to cool and check it again.

Check the filling loop. If your boiler has a filling loop, make sure it's closed according to the manufacturer's instructions. Leaving it open can allow more water into the system and cause the pressure to rise.

Look for other signs of a leak. Damp patches around radiators, water beneath the boiler, or pressure that keeps dropping could point towards a wider problem with the heating system.

If the overflow pipe keeps dripping, arrange for a Gas Safe registered engineer to inspect the boiler; don't be tempted to block the pipe or attempt to stop the water coming out, as it's part of a safety mechanism. If the leak is substantial, water is reaching electrical components, or your boiler is displaying a serious fault, turn it off using its normal controls if safe to do so and seek urgent professional advice.

Why does my overflow pipe leak when the heating is on?

If the pipe only starts dripping when your central heating comes on, the expansion vessel could be the problem. Water expands as it heats up, and the expansion vessel is designed to accommodate this change without allowing the pressure in your heating system to rise too much. If the vessel loses its air charge or develops a fault, the pressure can increase rapidly whenever the boiler heats the radiators. Once the pressure reaches the safety valve's operating point, water is released through the overflow pipe, and as the system cools down, the pressure may then fall too low, leaving you needing to repressurise the boiler.

This pattern of rising pressure when hot and falling pressure when cold is a useful warning sign, although it doesn't confirm the diagnosis; a heating engineer will need to check the expansion vessel and pressure relief valve to establish what's causing the problem.

Can you fix a leaking boiler overflow pipe yourself?

There are some boiler pressure issues that homeowners can resolve by following their manufacturer's instructions, for example, if you've accidentally overfilled the heating system, the manual may explain how to safely reduce the pressure. However, if the overflow pipe is leaking because of a faulty valve, expansion vessel, or another internal boiler component, the repair should be carried out by a suitably qualified professional.

A leaking boiler overflow pipe might be caused by something relatively simple, but it's definitely not a problem you should ignore. Identifying the source of the leak and dealing with it early could save you from a more disruptive boiler breakdown later on.

If your overflow pipe is dripping, or you're concerned about your boiler pressure, TrustATrader can help you find vetted and reviewed heating engineers in your area. Look for a Gas Safe registered engineer with the appropriate qualifications for your boiler, so you can get the problem checked and your heating back to normal. For more advice on keeping you and your home safe, follow us on Facebook, Insta or Tiktok.

Looking for more plumbing advice?

Find clear, practical answers to common plumbing questions, helping homeowners understand everyday issues, know what checks they can carry out safely, and when it is best to contact a qualified professional.

  • What should I do if I have a blocked drain or sink?

    Start with a plunger - create a good seal and use firm, steady pressure. For a kitchen sink blocked with grease, bicarbonate of soda followed by vinegar can help. If that's not shifting it, a drain snake reaches further down the pipe. Go easy on chemical drain cleaners as they can damage older pipes and rarely sort the root cause. If the blockage keeps coming back, affects more than one outlet, or you're getting unpleasant smells, call a plumber rather than trying to patch up the problem.

  • How can I tell if I have a hidden water leak?

    The most obvious clue is a water bill that's gone up without any change in your usage. Beyond that, listen out for running water when everything's turned off, and watch for damp patches on walls or ceilings nowhere near an obvious water source. A quick self-test is to turn everything off and watch your water meter - if it's still moving, there's a leak somewhere. Tracking down exactly where it is usually needs a specialist detection kit, which a plumber can bring in without having to rip everything up.

  • What should I do if I have a burst pipe?

    Turn off your stopcock straight away - you'll usually find it under the kitchen sink or where the mains water enters the property. Once it's off, open your taps to drain what's left in the system, switch off the boiler if you can do so safely, and mop up any standing water before it reaches electrics or flooring. Then call a plumber. With burst pipes, the faster you act, the less damage you'll be faced with.

  • What is a gas safety certificate and do I need one?

    A Gas Safety Record is issued by a Gas Safe registered engineer after checking that all your gas appliances, flues, and pipework are safe. Landlords in England, Scotland, and Wales are legally required to get one every year and give tenants a copy within 28 days. For homeowners it's not a legal requirement, but getting a check done alongside your annual boiler service is a smart idea, particularly in older properties. Only a Gas Safe registered engineer can carry out the work or issue the certificate - you can check anyone's registration on the Gas Safe Register website.

  • Why is my water pressure low and can a plumber fix it?

    Low pressure usually comes down to one of a handful of things: a stop valve that's not fully open, limescale build-up in older pipes, a failing pressure-reducing valve, or an issue with your water provider's mains supply. In most cases a plumber can sort it - though if the problem is with the mains itself, you'll need to contact your water company first. Either way, don't just live with it - ongoing low pressure can sometimes point to something more serious.

  • How do I know if my boiler needs replacing or just repairing?

    If it's under ten years old and it's one specific fault, a repair usually makes sense. If it's over fifteen, has needed multiple fixes recently, is making strange noises, or your energy bills have crept up for no obvious reason - replacement is probably the better investment. A useful rule of thumb: if the repair would cost more than half the price of a new boiler, it's probably time to replace it.

  • How often should I get my plumbing inspected?

    There's no legal requirement for homeowners, but every two to three years is a sensible habit - especially in older properties or hard water areas where limescale builds up over time. Your annual boiler service covers some of the associated pipework too. And if anything seems off between inspections - odd noises, discoloured water, unexplained damp - don't wait. Get it looked at sooner.

  • Why do my pipes make a banging or knocking noise?

    That banging sound (sometimes called water hammer) usually happens when water flow is suddenly stopped or redirected, sending a pressure wave through the pipes. It's most common after flushing the toilet, shutting a tap sharply, or when a washing machine valve closes. Pipes that aren't properly secured can also knock against walls or joists. It sounds alarming but it's often an easy fix - a plumber can figure out whether it's a pressure issue, a faulty valve, or just some loose pipework.

Have a question about TrustATrader?

If you have a question in relation to TrustATrader specifically, please check out the TrustATrader FAQs, with separate lists tailored to consumers and tradespeople. Alternatively, get in touch with our team. We're happy to help!